Key Takeaways
- Geek Bar Pulse is straightforward to use. Let's start your enjoyable vaping usage with Geek Bar Pulse via the detailed guidance below.
- Discover how to use Geek Bar Pulse mode effectively.
- Acquire further useful tips to maintain your Geek Bar Pulse in good condition for a consistent and optimal experience.
Geek Bar Pulse: How to Use It for the First Time
Before exploring how to use a geek bar pulse, consider these initial setups for a seamless experience. Particularly, should you be a first-time user, don't skip this part!
Unboxing and Checking the Device
Carefully remove Geek Bar Pulse from the package. Ensure all components are intact. Generally, you will find the device, USB-C charging cable, and user manual.
Upon first-time use, get familiar with the device's components, such as a mouthpiece for inhaling, LED indicators for monitoring battery and e-liquid levels, or a charging port.
Besides, remember to check for any defects or damage during the transit. Ensure device elements are clean and in good condition without any debris.
Ensuring the Battery Charge
Before using the Geek Bar Pulse, make sure your device has enough battery power.
The LED indicator will assist you in monitoring the battery level and charging status. Once fully charged, the LED might either change color or turn off. Otherwise, the indicator comes with a blinking light to show low battery or charging progress.
In case required to charge, connect the Geek Bar Pulse to a USB-C charger. Varied to the device's current battery level, the full charge commonly takes you 30-60 minutes.
Inspect battery levels and charging status on LED display
How To Use the Geek Bar Pulse in 3 Easy Steps
Once everything is set up, follow the below straightforward steps to use your Geek Bar Pulse with optimal experience!
Step 1: Turn On the Device
There are two ways to turn on your Geek Bar Pulse device: Power button or Auto-draw functionality (if featured).
- Power button: You first need to locate the Switch. The device has a switch on the bottom of the device with three positions: Close, Middle (standard vaping mode), and Pulse (larger vapor production). Next, you move the Switch to either the middle or upper position to turn on the device. The screen should light up, indicating that the device is active.
- Auto-draw activation: The Geek Bar Pulse features auto-draw functionality, meaning it activates when you inhale through the mouthpiece. There is no need for a power button.
Step 2: Adjust settings
If the device supports adjustments such as vapor intensity, you can customize these modes to your liking.
Typically, the device includes a toggle switch located at the bottom for adjusting between two modes:
- Middle/Regular Mode: Provides up to 15,000 puffs with a milder experience.
- Pulse Mode: Offers up to 7,500 puffs, generating larger vapor clouds and more intense flavor.
Accordingly, switch to your desired mode to personalize your experience. For instance, you might adjust the Pulse mode to double vapor output.
What's more? Keep in mind to monitor the battery and e-liquid levels for optimal performance. Check this status via LED indicators on your device.
Utilize a smart display for adjusting settings. Source: Vape Vibe
Step 3: Take your First Puff
Place the mouthpiece to your lips and inhale gently. You might encounter gurgling or spitting e-liquid if using excessive airflow.
When starting with the first puff, you might feel the vapor and experience the flavor. Indeed, the Geek Bar Pulse offers various flavors. So, select your favorite flavor and enjoy the smooth vaping experience.
Should you desire to explore more Geek Bar Pulse flavor options, check out more worthwhile choices from Black Coral. We are a premium vape retailer to cater various E-cigarette enthusiasts with great and trusted selections.
Numerous Geek Bar Pulse flavors offered by Black Coral
How To Use Geek Bar Pulse Mode
Knowing how to use Geek Bar Pulse Mode effectively certainly enhances your vaping usage. Let's uncover further insights about it below.
Understand "Pulse Mode" and Activate it
Pulse mode is a special feature on the Geek Bar Pulse to adjust the delivery of vapor. During each inhale, this mode pulses to provide a more powerful hit. Indeed, it engages both coils simultaneously for enhanced vapor output, allowing for up to 7,500 puffs. Accordingly, the device can significantly improve vapor production and flavor intensity.
Many vapers prefer a more satisfying hit and would love this mode. Besides, note that using Pulse Mode will drain the battery faster than Regular Mode, so manage your usage accordingly.
To activate Pulse Mode, flip the toggle switch to the upper position labeled "Pulse.". You can verify by looking for a rocket ship icon on the device's display screen. The "on" icon indicates that the coils are active.
Pulse mode on Geek Bar Pulse. Source: Off The MRKT
5 Benefits of Using "Pulse Mode"
The Pulse Mode provides various advantages to level up your vaping enjoyment, as listed followings:
- Increased Vapor Production: Pulse Mode doubles the vapor output compared to standard mode. It is ideal for making larger clouds and a more satisfying experience.
- Enhanced Flavor Intensity: The simultaneous activation of both coils creates consistent e-liquid vaporization. It leads to richer and more intensive flavor profiles for an overall enjoyable vaping experience.
- Higher Nicotine Delivery: Users receive more nicotine with each puff via using "Pulse Mode". It is particularly advantageous for anyone transitioning from traditional cigarettes or with higher nicotine needs.
- Smoother Hits: The device gradually ramps up vapor production. Hence, it makes each inhale feel smoother. Any users who love softer and more controlled hits will have a more satisfying vaping experience.
- Versatility: Users can switch between modes depending on their preference or situation. For example, using Pulse Mode for an intense experience and standard mode for longer-lasting use.
Keeping Your Geek Bar Pulse In Top Condition
Should you desire to ensure the longevity and optimal performance of your Geek Bar Pulse, follow these maintenance tips for recharging, cleaning, and troubleshooting common issues.
How To Recharge The Device Safely
Always recharge when the battery indicator shows low power. Avoid letting it completely drain to maintain battery health.
It would help if you also used the correct charger for efficient charging and avoiding any damage. Utilize the USB-C charging cable included in the package or at least a compatible one.
Before connecting the power source, check the charging port for debris to ensure a secure connection. Moreover, charge the device on a safe, flat and dry surface to prevent any overheating and accidents.
Remember to monitor the charging status via the smart display. It would help if you waited until the fully charged battery before unplugging to ensure optimal performance. Especially avoid overcharging the device to extend the battery life.
USB-C charge cable for Geek Bar Pulse. Source: Nzvapor
Cleaning Tips for the Mouthpiece and Exterior
For exterior cleaning, use a slightly damp cloth to wipe down the device. Please don't use any harsh chemicals, or else they will damage the device's surface or finish.
Regarding mouthpiece cleaning, remove all debris or residue with a soft cloth, especially after each use. You might also drip a cotton swab into isopropyl alcohol and then clean gently. Remember to use a small amount of isopropyl alcohol.
Notably, ensure no moisture enters any openings, such as the mouthpiece or charging port. Therefore, don't immerse the device in water or use liquid cleaners. Otherwise, the water can damage internal components.
An additional tip is to regularly check for cracks or wear on the device's casing while cleaning. You might find any leaks or malfunctions to fix sooner.
Troubleshooting Common Issues
When using the Geek Bar Pulse, you might encounter some common issues, such as blinking lights, limited vapor output or inactive devices. Don't worry! Here are simple tips to resolve these matters.
Troubleshooting Geek Bar Pulse When flashing or blinking lights. Source: BroadWaySmokeShop
- Blinking lights: If you see blinking lights, it might indicate a low battery. So, you should recharge the device and motor charging status. In case of continuous blinking, while using, the device might have sensor issues. Try resetting it by switching "close" mode and then back on.
- Reduce vapor output: Limited vapor production might indicate low e-liquid level, blocked airflow, coil issues or battery power.
- Check the e-liquid level on the smart display; You then need to replace the pod if it is low or empty.
- Inspect airflow and ensure airflow vents are clean of any debris or residue. Still experiencing weak flavor or vapor production, the cause might be the worn-out coils. Consider replacing the device if using it extensively.
- In some cases, low battery leads to decreased vapor output. Hence, charge the device fully to restore the full vapor production.
- Inactive devices: Ensure you activate the devices correctly via the power button or auto-draw feature. Alternatively, your pod might run out of power. Charge the device fully and try again.
Frequently Asked Questions About How to Use the Geek Bar Pulse
1. How do I turn on/off the Geek Bar Pulse?
You can turn on the Geek Bar Pulse by switching the button to middle or pulse mode. To turn off the vape, switch to a lower position - "Close" mode.
Or else, regarding some auto-draw models, inhale to activate the device, and it will turn down automatically when not in use.
2. What is Pulse Mode on the Geek Bar Pulse?
Pulse Mode is a feature to increase vapor production and flavor intensity but reduces puff count.
3. Do I need to refill or replace the Geek Bar Pulse?
No, you don't need to refill or replace Geek Bar Pulse's parts. Indeed, Geek Bar Pulse is a disposable vape and not designed for refilling.
4. How long does a fully charged Geek Bar Pulse last?
It depends on your usage frequency and device capacity. Generally, a fully charged Geek Bar Pulse lasts 1-3 days for light to moderate users and less than 1 day for heavy users.